Using Call Park - Nortel 2002 User Manual

While on an active call

Using Call Park

Use the Call Park feature to hold temporarily (park) and retrieve a call
from any telephone. Using Call Park does not tie up a line. When
configured network-wide, Call Park can be used across networks. A
System Park Extension can be configured to automatically park most
calls.
To park a call on the System Park DN or your own DN:
To park a call on a DN other than the System Park DN or your own
DN:
68
During an active call, press the
key twice.
Note: By default, the call is parked on
your DN unless a
enabled to automatically park calls on
the system.
1. Press the Park
2. Dial the DN where you want to park the
call.
3. Press the Park
Park
System Park is
soft key.
soft key.
soft