Configuring Area Code Setup - Nortel 2004 User Manual

Configuring options
or

Configuring Area Code Setup

Using the Area Code menu, a user can save up to 3 area codes. After an
incoming call arrives with an area code that matches one of the 3 stored
area codes, the incoming call number is reordered to display the
telephone number followed by the area code (as opposed to the area
code followed by the telephone number).
This reordering is also performed when you scroll through your Callers
List.
To configure the area code, press the
Options, and select
To configure default area codes (3 maximum):
42
2. Press the
3. Press the
scroll and highlight one of the following:
— Preferred name match on
— Preferred name match off
4. Choose one of the following:
— Press the
configuration.
— Press the
existing configurations.
Call Log Option
1. Press the
scroll and to highlight
Select soft key.
Up/Down navigation keys to
Select soft key to save the
Cancel soft key to keep
Services key, select
from the menu.
Up/Down navigation keys to
Area Code
Telephone
Setup.