Configuring Area Code Setup - Nortel NN43118-100 User Manual

Configuring Area Code Setup

Using the Area Code Setup menu, a user can save up to three area
codes. After an incoming call arrives with an area code that matches one
of the three stored area codes, the incoming call number is reordered to
display the phone number followed by the area code (as opposed to the
area code followed by the phone number).
This reordering is also performed when you scroll through your Callers
List.
To configure an area code, tap the
Options, and select
To configure default area codes (three maximum):
Configuring services on the IP Phone 2007
Services
Call Log Option
1. Press the
scroll and to highlight
2. Tap the
3. Press the
scroll and to highlight one of the
following:
— 1st Code:
— 2nd Code:
— 3rd Code:
4. Tap the
5. Use the dialpad to enter the new area
code at the prompt.
soft key, select
from the menu.
Up/Down navigation keys to
Area Code
Select soft key.
Up/Down navigation keys to
Select soft key.
Telephone
Setup.
57