About the Nortel IP Phone 2002
IP Phone 2002 models
There are two models of the IP Phone 2002, referred to as Phase 1 and
Phase 2. The Phase 2 models have some features that are not available
on the Phase 1 models. To determine the model of your phone, turn the
phone over and locate the label containing the product code (NT code).
The product code identifies the model of your phone.
Table 1: IP Phone 2002 product codes
Product code
NTDU76xxxx
NTDU91xxxx
Note: Where "xxxx" represents any valid character.
Basic features
The IP Phone 2002 supports the following features:
•
four programmable line (DN)/feature keys (self-labeled)
•
four soft keys (self-labeled) providing access to a maximum of nine
features
Note 1: Some IP Phone 2002 phones are not configured to support
soft key functionality. Consult your system administrator.
•
multi-field LCD display screen
•
call timer to indicate the duration of each call
•
speaker for on-hook dialing/listening
•
volume control bar for adjusting ringer, speaker, handset, and
headset volume
•
six specialized fixed keys:
— Quit
— Directory
12
Model
Phase 1
Phase 2