Configuring Area Code Setup - Nortel IP Phone 2002 User Manual

Configuring options
or

Configuring Area Code Setup

Use the Area Code Setup menu to save up to three area codes. When an
incoming call arrives with an area code that matches one of the three
stored area codes, the incoming call number is reordered to display the
telephone number followed by the area code (as opposed to the area
code followed by the telephone number). This reordering is also
performed when a user scrolls through the callers list. To configure the
area code, press the
select Call Log Option
To configure default area codes (maximum of three):
44
3. Press the
scroll and highlight one of the following:
— Preferred name match on
— Preferred name match off
4. Choose one of the following:
— Press the
configuration.
— Press the
existing configurations.
Services key, select
from the menu.
1. Press the
scroll and highlight
2. Press the
Up/Down navigation keys to
Select soft key to save the
Cancel soft key to keep
Telephone Options, and
Up/Down navigation keys to
Area Code
Select soft key.
Setup.