While On An Active Call; Placing A Call On Hold - Nortel 2002 User Manual

While on an active call

While on an active call
This section describes the following features, available during an active
call:
• "Placing a call on hold" on page 64
• "Transferring a call" on page 65
• "Using Timed Reminder Recall" on page 66
• "Using Attendant Recall" on page 67
• "Using Call Park" on page 68
• "Recording a Calling Party Number" on page 70
• "Displaying incoming call information" on page 71
• "Tracing a malicious call" on page 71

Placing a call on hold

Use the Hold feature when talking on one line and another call arrives on
a second line. Retain the original call by putting it on hold and then
answer the second call.
To place a call on hold:
(Hold)
To retrieve a call on hold:
64
Press the Hold key. The LCD indicator
flashes beside the line on hold.
Note: If Automatic Hold
active call is automatically put on hold
when you answer the second call.
Press the line (DN) key beside the
flashing LCD indicator.
is enabled, the