Upnp - TP-Link TL-MR3020 User Manual

To assign a computer or server to be a DMZ server:
1. Click the Enable radio button
2. Enter the local host IP Address in the DMZ Host IP Address field
3. Click the Save button.
Note
:
After you set the DMZ host, the firewall related to the host will not work.
4.8.4

UPnP

Choose menu "Forwarding→UPnP", you can view the information about UPnP(Universal Plug
and Play) in the screen (shown in Figure 4-43).The UPnP feature allows the devices, such as
Internet computers, to access the local host resources or devices as needed. UPnP devices
can be automatically discovered by the UPnP service application on the LAN.
Current UPnP Status - UPnP can be enabled or disabled by clicking the Enable or
Disable button. As allowing this may present a risk to security, this feature is enabled by
default.
Current UPnP Settings List - This table displays the current UPnP information.
TL-MR3020
Figure 4-42 DMZ
Figure 4-43 UPnP Setting
-70-
Portable 3G/4G Wireless N Router