Table of Contents
Advertisement
Note:
To apply any settings you have altered on the page, please click the Save button, and then you
will be reminded to reboot the device.
2) Client: This mode allows the device to act as a wireless station to enable wired host(s) to
access an AP.
SSID - If you select the radio button before SSID, the AP client will connect to the AP
according to SSID. Enter the SSID of AP that you want to access.
MAC of AP - If you select the radio button before MAC of AP, the AP client will connect to
the AP according MAC address. Enter the MAC address of AP that you want to access.
Region - Select your region from the pull-down list. This field specifies the region where
the wireless function of the device can be used. It may be illegal to use the wireless
function of the device in a region other than one of those specified in this field. If your
country or region is not listed, please contact your local government agency for
assistance.
When you select your local region from the pull-down list, click the Save button, then the
Note Dialog appears. Click OK.
TL-MR3020
Figure 6-8 Wireless Settings in Client mode
-201-
Portable 3G/4G Wireless N Router
Advertisement
Table of Contents
