Ap Mode; Pc Configuration; Connect To Network; Router Configuration - TP-Link TL-MR3020 User Manual

Note:
After the rebooting, please reconnect to the network according to
Wireless Security is enabled, you need to enter the password you've just set to successfully
finish the connecting.

3.3 AP Mode

3.3.1

PC configuration

Here we take Wireless Network Connection as an example. (You can also go to Local Area
Connection to configure the PC for wired network connection, and then configure the router. If
you need instructions as to how to do this, please refer to
1. For Windows XP, please go to Start → Settings → Control Panel → Network and
Internet Connections → Network Connections; for Windows 7, please go to Start →
Settings → Control Panel → View network status and tasks → Manage network
connection. Right click Wireless Network Connection, and select Properties.
2. For Windows XP, double click Internet Protocol (TCP/IP) in the item list; for Windows 7,
double click Internet Protocol Version 4 (TCP/IPv4).
3. Select "Use the following IP address", enter the 192.168.0.x as the IP address (x can be
any number from 1 to 253), 255.255.255.0 as the Subnet mask; select "Use the following
DNS server addresses", enter the DNS server address provided by your ISP or network
administrator.
4. Click OK to finish the settings.
3.3.2

Connect to Network

1. Click the icon at the bottom of your desktop.
2. Click "Refresh network list", and then select the network. Click Connect.
Note:
The default SSID of the network is TP-LINK_POCKET_3020_xxxxxx. (The xxxxxx is the last six
characters of the router's MAC address.)
3. When Connected appears, you've successfully connected to the wireless network.
3.3.3

Router Configuration

1. To access the configuration utility, open a web-browser and type the default address
http://192.168.0.254
TL-MR3020
in the address field of the browser.
Figure 3-19 Login the Router
-19-
Portable 3G/4G Wireless N Router
3.2.2 Connect to
Appendix B: "Configuring the
Network. If
PC.")