Network - TP-Link TL-MR3020 User Manual

Note:
The default PIN code of the AP can be found in its label or the WPS configuration screen as
Figure 6-2.
You will see the following screen when the new device has successfully connected to the

network.

Note:
1) The WPS LED on the AP will light green for five minutes if the device has been successfully
added to the network.
2) The WPS function cannot be configured if the Wireless function of the AP is disabled.
Please make sure the Wireless function is enabled before configuring the WPS.
6.5 Network
Figure 6-4 the Network menu
There is one submenu under the Network menu (shown in Figure 6-4): LAN. Click it and you
will be able to configure the LAN function.
The Network option allows you to customize your local network manually by changing the
default settings of the AP.
Selecting Network will enable you to configure the IP parameters of Network on this page.
TL-MR3020 Portable 3G/4G Wireless N Router
-197-