TP-Link TL-MR3020 User Manual page 29

IP Address - This is the WAN IP address seen by external users on the Internet
(including your ISP). Enter the IP address into the field.
Subnet Mask - The Subnet Mask is used for the WAN IP address, it is usually
255.255.255.0.
Default Gateway - Enter the gateway IP address into the box if required.
Primary DNS - Enter the DNS Server IP address into the box if required.
Secondary DNS - If your ISP provides another DNS server, enter it into this field.
5. Click Next to continue, the Wireless settings page will appear as shown in Figure 3-17.
Click Survey button to find the available wireless networks. Select the SSID of your target
network and click Connect, and the SSID and BSSID will be filled automatically. If the
network security is on, please select the Key type and enter the Password.
6. Click Next and you will see the page as shown in Figure 3-18. Click the Reboot button to
make your wireless configuration take effect and finish the Quick Setup. (You're
recommended to go to Wireless > Wireless Security to set up the wireless security.)
TL-MR3020
Figure 3-17 Quick Setup – Wireless
Figure 3-18 Quick Setup – Finish
-18-
Portable 3G/4G Wireless N Router