Table of Contents
Advertisement
The WPS Configuration Screen of Wireless Adapter
By PIN
II.
If the new device supports Wi-Fi Protected Setup and the PIN method, you can add it to the
network by PIN with the following two methods.
Method One: Enter the PIN into my Router
Step 1. Keep the default WPS Status as Enabled and click the Add device button in Figure
5-2 , then the following screen will appear.
Step 2. Choose Enter the new device's PIN and enter the PIN code of the wireless adapter
in the field behind PIN in the above figure. Then click Connect.
Note:
The PIN code of the adapter is always displayed on the WPS configuration screen
Step 3. For the configuration of the wireless adapter, please choose Enter a PIN into my
access point or a registrar in the configuration utility of the WPS as below, and click
Next.
TL-MR3020
Portable 3G/4G Wireless N Router
-116-
Advertisement
Table of Contents
