Table of Contents
Advertisement
TL-MR3020
Portable 3G/4G Wireless N Router
4.5.2
3G/4G
Choose menu "Network→3G/4G", you can configure parameters for 3G/4G function on the screen
below. To use the 3G/4G function, you should first insert your USB modem on the USB port of the
Router. There is already much 3G/4G USB modem information embedded in the Router. The USB
modem parameters will be set automatically if the card is supported by the Router. Take MA180 for
example. If your USB modem inserted is supported by the Router, 3G/4G USB Modem will be
Identified shown in Figure 4-6 . If you want to check more advanced configuration parameters,
please click the Advanced Settings, and the page shown in Figure 4-7 will then appear. Otherwise,
"Unknown Modem" will be shown instead in Figure 4-8. Please visit our website
http://www.tp-link.com to get the latest USB modems compatibility list.
Note
:
3G/4G settings are unavailable when the Internet Access mode is set to WAN Only mode. Please
change settings on
4.5.1 Internet Access
if you want to use 3G/4G.
Figure 4-6 3G/4G
-37-
Advertisement
Table of Contents
