Table of Contents
Advertisement
MAC Address - The physical address of the Router, as seen from the LAN. The value
can't be changed.
IP Address - Enter the IP address of your Router or reset it in dotted-decimal notation
(factory default: 192.168.0.254).
Subnet Mask - An address code that determines the size of the network. Normally use
255.255.255.0 as the subnet mask.
Note:
1)
If you change the IP Address of LAN, you must use the new IP Address to login the Router.
2)
If the new LAN IP Address you set is not in the same subnet, the IP Address pool of the
DHCP server will change accordingly at the same time，while the Virtual Server and DMZ
Host will not take effect until they are re-configured.
5.6 Wireless
Figure 5-14 Wireless menu
There are five submenus under the Wireless menu (shown in Figure 5-14): Wireless Settings,
Wireless Security, Wireless MAC Filtering, Wireless Advanced and Wireless Statistics.
Click any of them, and you will be able to configure the corresponding function.
5.6.1
Wireless Settings
Choose menu "Wireless→Wireless Setting", and then you can configure the basic settings for
the wireless network on this page.
TL-MR3020
Portable 3G/4G Wireless N Router
Figure 5-13 LAN
-129-
Advertisement
Table of Contents
