Juniper MX240 Hardware Manual page 88

MX240 Ethernet Services Router Hardware Guide
2.
3.
60
Powering Off the Router
Wait until a message appears on the console confirming that the operating system
has halted. For more information about the command, see the JUNOS System
Basics and Services Command Reference.
Attach an electrostatic discharge (ESD) grounding strap to your bare wrist and
connect the strap to one of the ESD points on the chassis. For more information
about ESD, see "Preventing Electrostatic Discharge Damage" on page 130.
On an AC-powered router, switch the AC switch on each power supply to the off
position ( ). On a DC-powered router, switch the circuit breaker on each power
O
supply to the off position ( OFF ).