MX240 Ethernet Services Router Hardware Guide
DPC LEDs
Each DPC has LEDs on the craft interface that indicate its status. The DPC LEDs,
labeled
component is installed in the slot), are located along the bottom of the craft interface.
Table 14: DPC LEDs
SCB LEDs
Each SCB has two LEDs on the craft interface that indicates its status. The SCB LEDs,
labeled
located along the bottom of the craft interface. Table 15 on page 20 describes the
functions of the SCB LEDs.
Table 15: SCB LEDs
Fan LEDs
The fan LED is located on the top left of the craft interface. Table 16 on page 20
describes the functions of the fan LEDs.
Table 16: Fan LEDs
20
Craft Interface
1/0
,
1
, and
2
, (
1/0
shows status of either SCB1 or DPC0, depending on which
Label
Color
State
Green
On steadily
OK
Blinking
Off
FAIL
Red
On steadily
0
and
1/0
(the multifunction slot
Label
Color
State
Green
On steadily
OK
Blinking
Off
Red
On steadily
FAIL
Label
Color
State
Green
On steadily
FAN
Red
On steadily
Description
DPC is functioning normally.
DPC is transitioning online or offline.
The slot is not online.
DPC has failed.
1/0
can contain either SCB1 or DPC0), are
Description
SCB: Fabric and control board functioning normally.
SCB is transitioning online or offline.
The slot is not online.
SCB has failed.
Description
Fan is functioning normally.
Fan has failed.