Obtaining Documentation; Documentation Feedback - Juniper MX240 Hardware Manual

MX240 Ethernet Services Router Hardware Guide
Table 6: Additional Books Available Through http://www.juniper.net/books (continued)
Book
MPLS-Enabled Applications
OSPF and IS-IS: Choosing an
IGP for Large-Scale Networks
Routing Policy and Protocols
for Multivendor IP Networks
The Complete IS-IS Protocol

Obtaining Documentation

To obtain the most current version of all Juniper Networks technical documentation,
see the products documentation page on the Juniper Networks Web site at
http://www.juniper.net/
To order printed copies of this guide and other Juniper Networks technical documents,
or to order a documentation CD, which contains this guide, contact your sales
representative.
Copies of the Management Information Bases (MIBs) available in a software release
are included on the documentation CDs and at

Documentation Feedback

We encourage you to provide feedback, comments, and suggestions so that we can
improve the documentation. You can send your comments to
techpubs-comments@juniper.net
http://www.juniper.net/techpubs/docbug/docbugreport.html
to include the following information with your comments:
xxvi
Obtaining Documentation
Description
Provides an overview of Multiprotocol Label Switching (MPLS) applications (such as Layer 3
virtual private networks [VPNs], Layer 2 VPNs, virtual private LAN service [VPLS], and
pseudowires), explains how to apply MPLS, examines the scaling requirements of equipment
at different points in the network, and covers the following topics: point-to-multipoint label
switched paths (LSPs), DiffServ-aware traffic engineering, class of service, interdomain traffic
engineering, path computation, route target filtering, multicast support for Layer 3 VPNs, and
management and troubleshooting of MPLS networks.
Explores the full range of characteristics and capabilities for the two major link-state routing
protocols: Open Shortest Path First (OSPF) and IS-IS. Explains architecture, packet types, and
addressing; demonstrates how to improve scalability; shows how to design large-scale networks
for maximum security and reliability; details protocol extensions for MPLS-based traffic
engineering, IPv6, and multitopology routing; and covers troubleshooting for OSPF and IS-IS
networks.
Provides a brief history of the Internet, explains IP addressing and routing (Routing Information
Protocol [RIP], OSPF, IS-IS, and Border Gateway Protocol [BGP]), explores ISP peering and
routing policies, and displays configurations for both Juniper Networks and other vendors'
routers.
Provides the insight and practical solutions necessary to understand the IS-IS protocol and how
it works by using a multivendor, real-world approach.
.
Document name
Document part number
Page number
Software release version (not required for Network Operations Guides [NOGs])
http://www.juniper.net/
, or fill out the documentation feedback form at
. If you are using e-mail, be sure
.