Projector Rear Panel; D-73D Rear Panel - Runco D-73d Ultra Installation & Operation Manual

System Overview

Projector Rear Panel

Figure 2-3 shows the D-73d rear panel.
1 2 3
Figure 2-3. D-73d Rear Panel
1. POWER INPUT (Left-Eye Engine – 100 to 240 VAC)
Connect the left-eye optical engine to power here.
2. DHD INPUT (Left-Eye Engine)
An HDCP-compliant digital video input for connecting the HDMI Out To Pri.
Display from the Dimension Digital Controller.
3. RS-232C INPUT (Left-Eye Engine) (9-pin, female D-Sub)
Connect the Pri. Display Control output of the Dimension Digital Controller to this
input (see Figure 2-5).
4. STANDBY LED (Left-Eye Engine)
Indicates left-eye engine status as follows:
• Solid green = AC power present, ready to turn on.
• Flashing green = Projector is initializing; keypad functions not allowed.
• Off = Normal operation.
PRIMARY
SECONDARY
4 5 6 7 8
10 D-73d Series Installation/Operation Manual
9 10 11