Runco D-73d Ultra Installation & Operation Manual page 113

Standby Mode: Select Standby Mode from the Service menu to control the Dimension
Digital Controller's power management feature.
• Choose Low Power (the default setting) to have the Dimension Digital Controller
shut down completely when it is turned off. This conserves power but increases the
amount of time required by the Dimension Digital Controller to start up when it is
turned on.
• Fast Startup is a "quick-start" mode that keeps the Dimension Digital Controller
running when it is turned off, even though it appears to be in standby mode. This
results in much quicker startup times but consumes more power.
System Reset: To reset ALL controller settings (including image settings) back to their
factory defaults, choose System Reset from the Service menu.
A confirmation message appears. Select Yes to continue with the reset or select No to
cancel.
This action is not undoable. Proceed with caution! Before you
Caution
perform a System Reset, save your "Custom" Memory Presets
(page 78) and ISF Day/Night Memory Presets (page 85).
D-73d Series Installation/Operation Manual 97
Operation