Vx-6000D Rear Panel - Runco VX-6000d Owner's Operating Manual

Figure 2-2 shows the VX-6000d rear connector panel.
HDMI IN
100-240V
AC INPUT
1
Figure 2-2. VX-6000d Rear Panel
1. POWER INPUT (100 to 240 VAC)
Connect the VX-6000d to power here.
2. HDMI INPUT
An HDCP-compliant, digital video input for connecting the HDMI output from the DHD
Controller.
3. BUILT-IN KEYPAD
Used to navigate the VX-6000d on-screen menus. Refer to VX-6000d Built-In
Keypad on page 18 for more information.
4. 12-VOLT (200 mA) TRIGGER OUTPUT (cylindrical, DC power supply-type jack)
Connection for a retractable screen, screen masking or other, 12-volt
trigger-activated equipment. Outputs +12 volts/200 mA when the projector is turned
on.
5. WIRED IR (3.5-mm, mini phono jack)
Not used. To use an external infrared receiver or wired remote control with this
projector, connect it to the IR input on the DHD Controller (see Figure 2-4).
6. RS-232C INPUT (RJ-11 female connector)
Connect the RS-232 output from the DHD Controller here, using the provided
communication cable.
Runco VX-6000d Owner's Operating Manual
Downloaded From projector-manual.com Runco Manuals
2 3
+12V WIRED RS-232C
IR
4 5 6
7
Controls and Functions
2.2

VX-6000d Rear Panel