Device Setting - TRENDnet TPE-224WS User Manual

TRENDnet User's Guide

Device Setting

You can set the device by using the function key in the Device Setting Dialog box.
Configuration Setting: In this Configuration Setting, you can set the IP Address, Subnet
Mask, Gateway, Group Interval, System name, Location and IP Mode.
Select the device in the Discovery list or Monitor List and press this button, then the
Configuration Setting window will appear, after entering the data that you want to
change, you must enter the password and press the "Set" to process the data change
immediately. The default password of TRENDnet Web Smart Switches is "admin".
Password Change: You can use this Password Change when you need to change the
password, fill in the password needed in the dialog box and press "Set" button to
proceed the password change immediately.
© Copyright 2014 TRENDnet. All Rights Reserved.
Firmware Upgrade: When the device has a new function, there will be a new firmware
to update the device, use this function to update.
Access Web: Double click the device in the Monitor List or select a device in the Monitor
List and press this "Web Access" button to access the device in Web browser.
DHCP Refresh: Press this "DHCP Refresh" button to refresh IP address of selected device
form DHCP server. (Only applies if Web Smart switch IP address settings are set to
DHCP).
TPE-224WS
90