TRENDnet TPE-224WS User Manual page 80

TRENDnet User's Guide
Click Add to add the database entry to the table.
In the list, you can click Modify to modify an entry or click Delete or delete the entry.
You can also click Delete All to delete all of the entries in the table. If the entries span
multiple pages, you can navigate page number in the Page field and click Go or you can
click First, Previous, Next, and Last Page to navigate the pages.
• MAC Address: This parameter shows the host's MAC Address.
• VLAN ID: This parameter shows the host's VLAN ID of which the DHCP client is
a member.
•
IP Address: This parameter is the IP Address assigned by the DHCP server to
the DHCP client.
•
Port: This parameter is the port number where the DHCP client is connected.
• Type: This parameter indicates the following:
• Learned-The host IP Address is dynamically assigned by the DHCP server.
•
Static- The host IP Address is statically assigned. See "Static IP Addresses" on
page 300 for more information.
•
Lease Time: This parameter is the time that IP address assignment by the DHCP
server is valid.
© Copyright 2014 TRENDnet. All Rights Reserved.
4. Click Save Settings to Flash (menu).
5. Click Save Settings to Flash (button), then click OK.
Note: This step saves all configuration changes to the NV-RAM to ensure that if the
switch is rebooted or power cycled, the configuration changes will still be applied.
TPE-224WS
76