Enable Https/Ssl (Secure Socket Layer) Management Access - TRENDnet TPE-224WS User Manual

TRENDnet User's Guide

Enable HTTPS/SSL (Secure Socket Layer) management access

System > SSL Settings
By default, your switch management page can be accessed using standard web HTTP
protocol which is unsecure. Enabling HTTPS/SSL management access allows access to
the switch management page using secure encrypted communication which prevents
unauthorized users from intercepting user name and password credentials. It is
recommended to only enable this feature, if allowing switch management access from
other networks or over the Internet.
Note: Once HTTPS/SSL management access is enabled, HTTP management access will be
disabled forcing all access to the switch management page using secure encryption
communication only.
1. Log into your switch management page (see
on page 7).
2. Click on System, and click on SSL Settings.
3. Review the settings. Click Apply to save changes.
• SSL Status:
Enabled – Enables HTTPS/SSL management access and disables HTTP
o
unsecured mode.
Disabled – Disabled HTTPS/SSL management access and enabled HTTP
o
unsecured mode. (Default setting).
If enabling SSL management access, you will need to access the switch management
page using HTTPS instead of HTTP. (e.g. https://192.168.10.200)
Click Continue, Proceed to this website, and accept the certificate if prompted.
© Copyright 2014 TRENDnet. All Rights Reserved.
"Access your switch management page"
4. Click Save Settings to Flash (menu).
5. Click Save Settings to Flash (button), then click OK.
Note: This step saves all configuration changes to the NV-RAM to ensure that if the
switch is rebooted or power cycled, the configuration changes will still be applied.
TPE-224WS
17