Table of Contents
Advertisement
FUNCTION
Standby
Settings
Network
Settings
DESCRIPTION
Network
Selecting On enables the function, and the projector can be
monitored or controlled over a network when it is in standby mode.
Microphone
Selecting On enables the function, and the microphone can be used
even in standby mode
Monitor Out
Selecting On enables the function. The projector can output a VGA
signal when it is in standby mode and the COMPUTER 1 and
MONITOR OUT jacks are correctly connected to devices. See
"Connecting a monitor" on page 23
Enabling this function slightly increases the standby power
consumption.
The Monitor Out only works when an appropriate D-Sub input is
made to the COMPUTER 1 jack.
Audio Pass Through
The projector can play sound when it is in standby mode and the
corresponding jacks are correctly connected to devices. Press
to choose the source that you wish to use. See
page 20
for how to make the connection.
Enabling this function slightly increases the standby power
consumption.
Wired LAN
See
"Controlling the projector through a LAN environment" on page
48
for details.
Wireless LAN
See
"Controlling the projector through a LAN environment" on page
48
for details.
Remote Desktop
See
"Displaying image through Q Presenter" on page 58
Projection Login Code
See
"Using the Projection Login Code" on page 61
Broadcasting
See
"Using the broadcassting function" on page 62
for how to make the connection.
"Connection" on
for details.
for details.
for details.
Operation
/
81
Advertisement
Table of Contents
