Description Of Each Menu - BenQ MX768 User Manual

Description of each menu

• The default values listed in this manual, especially on pages 72-82, are for reference only.
They may vary between the projectors due to the continuous improvement to the
products.
FUNCTION
Wall Color
Aspect Ratio
2D Keystone
Corner Fit
Surface Fit
Position
Phase
H. Size
Digital Zoom
72
Operation
DESCRIPTION
Corrects the projected picture's color when the projection surface is
not white. See "Using Wall Color" on page 40
There are four options to set the image's aspect ratio depending on
your input signal source. See
for details.
Corrects vertical and horizontal keystonings of the image. See
"Correcting 2D keystone" on page 28
Manually adjust four corners of the image by setting the horizontal
and vertical values. See
Manually correct geographic distortion by Surface Fit calibration
function. See "Adjusting surface fit" on page 30
Displays the position adjusent page. To move the projected image,
use the directional arrow keys. The values shown on the lower
position of the page change with every key press you made until they
reach their maximum or minimum.
This function is only available when a PC signal (analog RGB) is
selected.
Adjusts the clock phase to reduce image
distortion.
This function is only available when a PC
signal (analog RGB) is selected.
Adjusts the horizontal width of the image.
This function is only available when a PC signal (analog RGB) is
selected.
Magnifies or reduces the projected image. See
searching for details" on page 37
"Selecting the aspect ratio" on page 37
for details.
"Adjusting corner fit" on page 29
for details.
for details.
for details.
for details.
"Magnifying and