Table of Contents
Advertisement
Adjusting the sound
The sound adjusents made as below will have an effect on the projector speaker(s). Be sure
you have made a correct connection to the projector audio input. See
page 20
for how the audio input is connected.
Muting the sound
To adjust the sound level, press MUTE on the remote
control, or:
1.
Press MENU/EXIT and then press
SYSTEM SETUP: Advanced menu is selected.
2.
Press
MODE/ENTER. The Audio Settings page displays.
3.
Select Mute and select On.
Adjusting the sound level
To adjust the sound level, press VOLUME +/- on the
remote control or on the projector, or:
1.
Repeat steps 1-2 above.
2.
Select VOLUME and select a desired sound level.
Turning off the Power on/off ring tone
To turn off the ring tone:
1.
Repeat steps 1-2 in Muting the sound section.
2.
Select Power On/Off Ring Tone and select Off.
The only way to change Power on/off ring tone is setting On or Off here. Setting the sound mute
or changing the sound level will not affect the Power on/off ring tone.
Adjusting the microphone's sound level
To adjust the sound level:
1.
Repeat steps 1-2 in Muting the sound section.
2.
Select Microphone Volume and select a desired sound level.
Microphone sound will still function even though Mute is activated.
to select Audio Settings and press
/
until the
"Connection" on
45
Operation
Advertisement
Table of Contents
