Table of Contents
Advertisement
1.
Go to the SYSTEM SETUP: Advanced > Security Settings > Change
Security Settings menu after opening the OSD menu system. Press MODE/
ENTER. The message "INPUT PASSWORD" appears. Enter the current password.
If the password is correct, the OSD menu returns to the Security Settings page.
Press
Displaying image through Q Presenter
The Q Presenter is an application running on the host PC. It connects to an available
network display and transfers the desktop contents to the network display via local
network connection.
Be sure to turn off other virtual network control programs before using Q Presenter.
1.
Connect the projector with the RJ45 cable, and make sure your laptop or computer
also link to the LAN. See
"Configuring the Wireless LAN Settings" on page 49
2.
Find the IP address and enter the address of the projector in the address bar of your
browser. See
49
for details.
3.
Download the Q Presenter, unzip it and complete program installation.
4.
Once installed, double click the Q Presenter icon. The Q Presenter page appears.
5.
Click the Search icon.
The Search page allows you to search and connect a network display.
i. You can key in the IP address (see
web browser" on page 49
58
Operation
to select Web Control Lock and press
"Configuring the Wired LAN Settings" on page 48
"Controlling the projector remotely through a web browser" on page
iv
ii
"Controlling the projector remotely through a
for details.) or just click "Search".
/
to select On or Off.
for details.
i
iii
and
Advertisement
Table of Contents
