Table of Contents
Advertisement
Optimizing the image
Selecting a picture mode
The projector is preset with several predefined
picture modes so that you can choose one to suit
your operating environment and input signal
picture type.
To select an operation mode that suits your need,
you can follow one of the following steps.
•
Press MODE/ENTER on the remote control
or projector repeatedly until your desired
mode is selected.
•
Go to the PICTURE > Picture Mode menu and press
mode.
The picture modes are listed below.
1.
Dynamic mode: Maximizes the brightness of the projected image. This mode is
suitable for environments where extra-high brightness is required, such as using the
projector in well lit rooms.
2.
Presentation mode (Default): Is designed for presentations. The brightness is
emphasized in this mode.
3.
sRGB mode: Maximizes the purity of RGB colors to provide true-to-life images
regardless of brightness setting. It is most suitable for viewing photos taken with an
sRGB compatible and properly calibrated camera, and for viewing PC graphic and
drawing applications such as AutoCAD.
4.
Cinema mode: Is appropriate for playing colorful movies, video clips from digital
cameras or DVs through the PC input for best viewing in a blackened (little light)
environment.
5.
User 1/User 2 mode: Recalls the settings customized based on the current available
picture modes. See
Setting the User 1/User 2 mode
There are two user-definable modes if the current available picture modes are not suitable
for your need. You can use one of the picture modes (except the User 1/User 2) as a
starting point and customize the settings.
1.
Press MENU/EXIT to open the On-Screen Display (OSD) menu.
2.
Go to the PICTURE > Picture Mode menu.
3.
Press
4.
Press
This function is only available when User 1 or User 2 mode is selected up in the Picture Mode
sub-menu item.
5.
Press
6.
Press
See
"Fine-tuning the image quality in user modes"
7.
The settings will be saved when selecting.
"Setting the User 1/User 2 mode" on page 39
/
to select User 1 to User 2.
to select Reference Mode.
/
to select a picture mode that is closest to your need.
to select a sub-menu item to be changed and adjust the value with
/
to select a desired
for details.
below for details.
Operation
/
.
39
Advertisement
Table of Contents
