Table of Contents
Advertisement
•
Using the projector or remote control
Press
/ / /
Keystone page. Press
to 30. Press
/
•
Using the OSD menu
1.
Press MENU/EXIT and select the
menu.
2.
Press
to select 2D Keystone and press
MODE/ENTER.
3.
Press
/ / /
•
Using the QUICK INSTALL key
1.
Press QUICK INSTALL on the remote control.
2.
Press
to select 2D Keystone and press
MODE/ENTER.
3.
Press
/ / /
Adjusting corner fit
Manually adjust four corners of the image by setting the horizontal and vertical values.
•
Using the OSD menu
1.
Select Corner Fit in the
press MODE/ENTER.
to display the 2D
/
to adjust vertical values from -30
to adjust horizontal values from -25 to 25.
to adjust the keystone values.
to adjust the keystone values.
DISPLAY menu
DISPLAY
and
29
Operation
Advertisement
Table of Contents
