Setting The Presentation Timer - BenQ MX768 User Manual

Setting the presentation timer

The presentation timer can indicate the presentation time on the screen to help you
achieve better time management when giving presentations. Follow these steps to utilize
this function:
1. Go to the SYSTEM SETUP: Basic > Presentation Timer menu and press
MODE/ENTER to display the Presentation Timer page.
2. Select Timer Period and decide the timer period by pressing
time can be set from 1 to 5 minutes in 1-minute increments and 5 to 240 minutes in
5-minute increments.
3. Press
the screen by press
Selection
Always
1 Min/2 Min/3 Min
Never
4. Press
Top-Left
5. Press
direction by pressing
Selection
Count Up
Count Down
6. Press
reminder by pressing
the last 30 seconds of counting down/up, and a triple beep sound will be produced
when the timer is up.
7. To activate the presentation timer, press
MODE/ENTER.
8. A confirmation message displays. Select Yes and press MODE/ENTER to confirm.
You will see the message "Timer is On" displaying on the screen. The timer starts
counting at the time the timer is on.
To cancel the timer, perform the following steps:
1. Go to the
select
2. Select Yes and press MODE/ENTER to confirm. You will see the message "Timer
is Off!" displaying on the screen.
to select Timer Display and choose if you want the timer to show up on
/
ing .
Description
Displays the timer on screen throughout the presentation time.
Displays the timer on screen in the last 1/2/3 minute(s).
Hides the timer throughout the presentation time.
to select Timer Position and set the timer position by pressing
Bottom-Left Top-Right
to select Timer Counting Direction and select your desired counting
/
.
Description
Increases from 0 to the preset time.
Decrease from the preset time to 0.
to select Sound Reminder and decide if you want to activate sound
/ . If you select On, a double beep sound will be heard at
SYSTEM SETUP: Basic
to select Off. Press MODE/ENTER. A confirmation message displays.
Bottom-Right
and press /
> Presentation Timer menu and press
/ . The length of
/
.
to select On and press
Operation
43