Table of Contents
Advertisement
Main Menu
Table of Contents
Your Acura has a memory feature
for the driver's seat and outside
mirror positions.
Two seat and outside mirror
positions, can be stored in separate
memories. You select a memorized
position by pushing the appropriate
button or using the appropriate
remote transmitter (Driver 1 or
Driver 2).
Storing a Driving Position in
Memory
Store a driving position only when
the vehicle is parked.
1.
Turn the ignition switch to ON (II).
You cannot add a new driving
position in the memory unless the
ignition switch is in the ON (II)
position. You can recall a
memorized position with the
ignition switch in any position.
2.
Adjust the seat to a comfortable
position (see page
88
Adjust the outside mirrors for best
visibility (see page
91
Driving Position Memory System
MEMO BUTTON
3.
Press and release the MEMO
).
button on the control panel. You
will hear a beep. Immediately
).
press and hold one of the memory
buttons (1 or 2) until you hear two
beeps. The indicator in the
memory button will come on. The
current positions of the driver's
seat and outside mirrors are now
stored.
Instruments and Controls
MEMORY BUTTONS
CONTINUED
93
Advertisement
Table of Contents
