Table of Contents
Advertisement
Main Menu
Table of Contents
Turn Signal and
Hazard Warning
Indicators
The left or right turn signal light
blinks when you signal a lane change
or turn. If the indicators do not blink
or blinks rapidly, it usually means
one of the turn signal bulbs is
burned out (see page
214
the bulb as soon as possible, since
other drivers cannot see that you are
signaling.
When you press the Hazard Warning
button, both turn signals blink. All
turn signals on the outside of the
vehicle should flash.
''Daytime Running
Lights'' Indicator
Canadian models only
This indicator comes on when you
turn the ignition switch to ON (II)
with the headlight switch off and the
parking brake set. It should go off if
you turn on the headlights or release
). Replace
the parking brake. If it comes on at
any other time, it means there is a
problem with the DRL.
High Beam Indicator
This indicator comes on with the
high beam headlights. See page
74
for information on the headlight
controls.
Instrument Panel Indicators
Lights On Indicator
This indicator reminds you that the
exterior lights are on. It comes on
when the light switch is in either the
or
position. If you turn the
ignition switch to ACCESSORY (I)
or LOCK (0) without turning off the
light switch, this indicator will
remain on. A reminder chime will
also sound when you open the driver's
door.
Instruments and Controls
55
Advertisement
Table of Contents
