Table of Contents
Advertisement
Main Menu
Table of Contents
Clock
On models without Navigation System
The clock displays the time with the
ignition switch in the ON (II)
position. If your vehicle's battery is
disconnected or goes dead, you will
need to reset the clock.
Change the hour by pressing and
holding the H button until the
numbers advance to the desired time.
Change the minutes by pressing and
holding the M button until the
numbers advance to the desired time.
You can quickly set the time to the
nearest hour. If the displayed time is
before the half hour, press the R
button to set the clock back to the
previous hour. If the displayed time
is after the half hour, the clock sets
forward to the beginning of the next
hour.
For example: 1:06 will reset to 1:00
1:52 will reset to 2:00
On models with Navigation System
The clock is set automatically.
Clock, Parking Brake
Parking Brake
To apply the parking brake, pull the
lever up fully. To release it, pull up
slightly, push the button, and lower
the lever. The parking brake
indicator on the instrument panel
should go out when the parking
brake is fully released (see page
Driving the vehicle with the parking
brake applied can damage the rear
brakes and axles.
Instruments and Controls
52
).
103
Advertisement
Table of Contents
