Table of Contents
Advertisement
Main Menu
Table of Contents
Driving Position Memory System
Doing any of the following after
pressing the MEMO button will
cancel the storing procedure.
Not pressing a memory button
within 5 seconds.
Readjusting the seat position.
Readjusting the outside mirror
position.
Each memory button stores only one
driving position. Storing a new
position erases the previous setting
stored in that button's memory. If
you want to add a new position while
retaining the current one, use the
other memory button.
94
Instruments and Controls
Selecting a Memorized Position
MEMORY BUTTONS
To select a memorized position, do
this:
1.
Make sure the parking brake is set
(M/T) or the shift lever is in Park
(A/T).
2.
Press the desired memory button
(1 or 2) until you hear a beep, then
release the button.
The system will move the seat and
outside mirrors to the memorized
positions. The indicator in the
selected memory button will flash
during movement. When the
adjustments are complete, you will
hear two beeps, and the indicator will
remain on.
Notes for vehicles with M/T
You cannot select a memorized
position if the transmission is in
Reverse. Shift to another gear,
then select.
If the parking brake is not set, you
must press and hold the memory
button until the adjustment is
complete.
Advertisement
Table of Contents
