Table of Contents
Advertisement
Main Menu
Table of Contents
Lights
3.
Pull the bulb straight out of its
socket. Push the new bulb straight
into the socket until it bottoms.
4.
Reinstall the socket into the light
assembly by turning it clockwise
until it locks.
5.
Test the lights to make sure the
new bulb is working.
Reinstall the trunk lining. Make
6.
sure it is installed under the edge
of the trunk seal.
216
Maintenance
7.
Insert the fastener into the hole on
the side of the trunk lining, and
push in the head of the fastener.
Screw the cargo net hook into the
fender.
Replacing the Back-up Light Bulb
(in Trunk Lid)
LEFT STOP
RIGHT STOP
CORNER
LEFT SIDE FASTENER
FASTENER
1 a.
Determine which back-up light
is out (left or right), then open
the trunk.
b.
Pop up the pin in the center of
the left or right corner fastener
with a small screwdriver, and
remove the fastener.
Remove the left side
only:
fastener the same way.
c.
Pull out the outside edge of the
rubber stop, then push the stop
outward, and pull it to remove it.
d.
Right side only:
screw from the trunk lid inner
handle, and remove the handle
TRUNK LID
trim.
INNER
HANDLE
e.
Pull back the corner of the
CORNER
trunk lid lining.
FASTENER
Left side
Remove the
Advertisement
Table of Contents
