Table of Contents
Advertisement
Main Menu
Table of Contents
To reset a trip meter, display it, then
press and hold the Select/Reset
button until the number resets to
''0.0''.
Both trip meters will reset if the
vehicle's battery goes dead or is
disconnected.
Outside Temperature
SELECT/
RESET
BUTTON
This shows the outside Fahrenheit
temperature in U.S. models, and
Centigrade temperature in Canadian
models.
Multi-Information Display
The temperature sensor is in the
front bumper. The temperature
reading can be affected by heat
reflection from the road surface,
engine heat, and the exhaust from
surrounding traffic. This can cause
an incorrect temperature reading
when your speed is under
19 mph (30 km/h). When you start
your trip, the sensor is not fully
acclimatized, therefore it may take
several minutes until the proper
temperature is displayed.
In certain weather conditions,
temperature readings near freezing
(32°F, 0°C) could mean that ice is
forming on the road surface.
Instruments and Controls
63
Advertisement
Table of Contents
