Table of Contents
Advertisement
Main Menu
Table of Contents
Lights
2.
Remove the electrical connector
from the bulb by pushing on the
tab and pulling the connector
down.
3.
Remove the bulb by turning it one-
quarter turn counterclockwise.
214
Maintenance
4.
Insert the new bulb into the hole
and turn it one-quarter turn clock-
wise to lock it in place.
5.
Push the electrical connector back
onto the bulb. Make sure it is on
all the way.
6.
Turn on the fog lights to test the
new bulb.
7.
(Driver's side)
Install the upper part of the air
intake duct.
8.
(Driver's side)
Install the engine compartment
corner cover, and secure it with
two fastener pins.
9.
Install the engine compartment
side cover.
Replacing the Front Turn Signal/
Parking Light Bulb
1.
Start the engine. If you are
replacing a driver's side bulb, turn
the steering wheel all the way to
the right. If you are replacing a
passenger's side bulb, turn the
steering wheel to the left. Turn off
the engine.
Advertisement
Table of Contents
