Table of Contents
Advertisement
Main Menu
Table of Contents
Remote Transmitter
Recalling a Memorized Driving
Position
With Driver 1
With Driver 2
Each remote transmitter also
activates the Driving Position
Memory System and changes the
keyless memory settings related to
that remote (see page
93
you open the driver's door after
unlocking it with the remote
transmitter, you will hear a beep.
The driver's seat and outside mirrors
move to the positions stored in that
memory location. You will hear two
86
Instruments and Controls
beeps when the movement is
completed.
The driving position memory
activated (Driver 1, Driver 2) is
shown on the back of each
transmitter. Make sure you store
your desired driving position in the
memory that is activated by the
transmitter you normally carry.
You can turn off this driving position
memory activation. Press and hold
the LOCK and UNLOCK buttons at
the same time. The LED in the
remote transmitter will blink twice.
Then release the buttons. Doing this
also cancels the keyless memory
settings for that remote and restores
). When
the default settings.
To turn it back on, repeat this
procedure. The LED will come on
for 1 second to indicate the feature
has been turned on.
Remote Transmitter Care
Avoid dropping or throwing the
transmitter.
Protect the transmitter from
extreme temperature.
Do not immerse the transmitter in
any liquid.
If you lose a transmitter, the
replacement needs to be
reprogrammed by your Acura
dealer.
Advertisement
Table of Contents
