Turn Signal And Headlights - Acura 2004 TL Owner's Manual

Main Menu Table of Contents

Turn Signal and Headlights

1. Turn Signal
2. Off
3. Parking and instrument panel
4. Headlights on
5. Fog lights off (U.S. models)
6. Fog lights on (U.S. models)
7. High beams
8. Flash high beams
74
Instruments and Controls
Turn Signal Push down on the
left lever to signal a left turn and up
to signal a right turn. To signal a lane
change, push lightly on the lever and
hold it. The lever will return to
center when you release it or
complete a turn.
Headlights The rotating switch
on the left lever controls the lights.
Turning this switch to the ''
position turns on the parking lights,
taillights, instrument panel lights,
side-marker lights, and rear license
plate lights. Turning the switch to
the '' '' position turns on the
headlights. If you leave the lights on
with the key removed from the
ignition switch, you will hear a
reminder tone when you open the
driver's door.
High Beams To switch from low
beams to high beams, push the left
lever forward until you hear a click.
The blue high beam indicator will
come on (see page
to return to low beams. To flash the
high beams, pull the lever back
lightly, then release it. The high
beams will stay on as long as you
hold the lever back.
''
Daytime Running Lights
(Canadian Models)
With the headlight switch off, the
daytime running lights come on
when you turn the ignition switch to
ON (II) and release the parking
brake. They remain on until you turn
the ignition off, even if you set the
parking brake.
). Pull it back
55