Table of Contents
Advertisement
Main Menu
Table of Contents
2.
Use a flat-tipped screwdriver to
remove the holding clip from the
middle edge of the inner fender
cover, and pull the inner fender
cover back.
3.
Remove the socket from the
headlight assembly by turning it
one-quarter turn counterclockwise.
4.
Remove the bulb from the socket
by pushing it in and turning it
counterclockwise until it unlocks.
5.
Install the new bulb in the socket.
Turn it clockwise to lock it in place.
6.
Insert the socket into the
headlight assembly. Turn it
clockwise to lock it in place.
7.
Test the lights to make sure the
new bulb is working.
8.
Push the inner fender cover in
place. Install the holding clip, and
lock it in place by pushing on its
center.
Replacing the Rear Turn Signal
Bulb (in Fenders)
1.
Open the trunk.
Using a small screwdriver, pop up
the pin in the center of the
fastener, then remove the fastener.
Unscrew and remove the cargo
net hook from the fender. Pull
back the trunk lining.
2.
Remove the socket by turning it
one-quarter turn counterclockwise.
Maintenance
Lights
CONTINUED
215
Advertisement
Table of Contents
