Cisco uBR-3x10 Hardware Installation And Cabling Manual page 73

Chapter 4 Cabling the RF Switch With the Cisco uBR10012 CMTS Cable Interface Line Cards
Table 4-5
Color
Gray
Gray
Gray
Gray
Gray
Gray
Gray
Gray
Table 4-6 Upconverter Output Cables to the Working Plant on the RF Switch (for MC28C Line Cards)
UPx RFS
Color Output CMTS
Brown 16 1M
Gray 15 1F
Brown 14 2M
Gray 13 2F
Brown 12 3M
Gray 11 3F
Brown 10 4M
Gray 9 4F
Cabling the Output Cables (CABLE PLANT to HUB)
This section describes cabling the RF switch for output (from the RF switch CABLE PLANT to the cable
headend equipment).
The output cables are connected to the CABLE PLANT section of the RF switch. The CABLE PLANT
header blocks are wired in the opposite sequence to the CMTS and PROTECT header blocks (see
Figure 4-14 on page
sections:
•
•
Equipment
•
•
•
OL-1984-06
Upconverter Output Cables to the Working Plant on the RF Switch (for MC16x Line
Cards)
UPx Output RFS–CMTS
15 1F–cable plant
13 2F–cable plant
11 3F–cable plant
9 4F–cable plant
7 5F–cable plant
5 6F–cable plant
3 7F–cable plant
1 1P F–protect (1P)
LC Slot (DS)
8/0—working(DS1)
8/0—working(DS0)
8/1—working(DS1)
8/1—working(DS0)
7/0—working(DS1)
7/0—working(DS0)
7/1—working(DS1)
7/1—working(DS0)
4-21. Use the same installation and connection procedures as described in these
Installing the Header Blocks on the Cisco uBR 3x10 RF Switch, page 4-9
Connecting the RF Cables (MC16x, MC28C Line Cards), page 4-15
7 cable bundles (10m), MCX connector to F-connector—multicolor, CAB-RFSW-3X10-10T
14 single cables
7 header blocks (installed)
Connecting the RF Cables (MC16x, MC28C Line Cards)
LC Slot (DS)
8/0–working (DS)
8/1–working (DS)
7/0–working (DS)
7/1–working (DS)
6/0–working (DS)
6/1–working (DS)
5/0–working (DS)
5/1–protect (DS)
UPx
Color Output
Brown 8
Gray 7
Brown 6
Gray 5
Brown 4
Gray 3
Brown 2
Gray 1
Cisco uBR-3x10 RF Switch Hardware Installation and Cabling Guide
RFS
CMTS LC Slot (DS)
5M 6/0—working (DS1)
5F 6/0—working (DS0)
6M 6/1—working (DS1)
6F 6/1—working (DS0)
7M 5/0—working (DS1)
7F 5/0—working (DS0)
1PM 5/1—protect (DS1)
1PF 5/1—protect (DS0)
4-19