Cisco uBR-3x10 Hardware Installation And Cabling Manual page 59

Chapter 4 Cabling the RF Switch With the Cisco uBR10012 CMTS Cable Interface Line Cards
Figure 4-3
upconverter
Alignment
Figure 4-4
upconverter
Header Blocks
The header block holds the MCX connectors that are connected to the individual coaxial cables. These
are Cisco MCX header blocks that mate to the Cisco uBR 3x10 RF Switch. Input cable kits have two
extra header blocks. Output cable kits do not have header blocks.
OL-1984-06
Cable Solution for the Cisco uBR 3x10 RF Switch and Cisco uBR10-LCP2-MC16x Line
Card
To
Header block (top)
Bevel
pins
MCX
connectors
F-connectors
Cable Solution for the Cisco uBR 3x10 RF Switch and Cisco uBR10-LCP2-MC28x Line
Card
To
Header block (top)
Bevel
MCX
connectors
F-connectors
MCX
connectors
(not used with
the MC16 card)
Alignment pins
Cisco uBR-3x10 RF Switch Hardware Installation and Cabling Guide
RF Cable Assemblies
4-5