Cisco uBR-3x10 Hardware Installation And Cabling Manual page 36

Verifying the Shipping Container Contents
Table 2-2 Cisco RF Switch Component List
Description
Cisco uBR 3x10 RF Switch—contains one Ethernet controller, one power supply, 10 upstream switch
cards, three downstream switch cards, and one blank panel.
The following accessories may arrive in separate shipping containers:
• Rack-mount kit—Two rack-mount brackets and four M5x8-mm Phillips flathead screws,
four M4 x 6–mm Phillips panhead screws, and four 10/32 x 3/8-inch slotted binderhead screws.
• AC-input power cable
• MCX connector removal tool
1
• Documentation , including the following:
Cisco uBR 3x10 RF Switch Switch Documentation Roadmap—Pointing you directly to the
–
location of related documentation on Cisco.com
– Rack-Mounting the Cisco RF Switch with the Cisco uBR10012 CMTS
– Rack-Mounting the Cisco RF Switch with the Cisco uBR7246VXR CMTS
Cabling the Cisco uBR 3x10 RF Switch
–
Regulatory Compliance and Safety Information for the Cisco RF Switch
–
Cisco Information Packet
–
1. Titles and quantities of documents will vary depending on the configuration that you choose. You must order Cisco IOS and other documentation that
isn't automatically shipped with the product when you order the hardware.
Cisco uBR-3x10 RF Switch Hardware Installation and Cabling Guide
2-12
Chapter 2 Preparing for Installation
Received
OL-1984-06