Seat Assembly - Weider 8530 User Manual

26. Attach the Backrest (41) to the Front Upright
(42) with two 1/4" x 2 1/2" Screws (43) and
two 1/4" Flat Washers (10).
27. Press a 1 1/2" Inner Cap (32) into the Seat
Frame (36).
Insert a 1/4" x 2" Carriage Bolt (38) through
the centre hole in the Seat Plate (37). Attach
the Seat Plate to the Seat (13) with two 1/4" x
3/4" Screws (18).
Insert the 1/4" x 2" Carriage Bolt (38) through
the indicated hole in the Seat Frame (36).
Tighten a 1/4" Nylon Locknut (2) with a 1/4"
Flat Washer (10) onto the Carriage Bolt.
Attach the other end of the Seat (13) to the
Seat Frame (36) with a 1/4" Flat Washer (10)
and a 1/4" x 2" Machine Screw (81).
28. Press a 1 1/2" Inner Cap (32) into the Leg
Lever (29).
Lubricate the 5/16" x 2 1/4" Bolt (33). Attach
the Leg Lever (29) to the Seat Frame (36)
with the 5/16" x 2 1/4" Bolt and a 5/16" Nylon
Locknut (3).
Insert the 5/16" x 2" Eyebolt (35) into the Leg
Lever (29) from the direction shown. Tighten
a 5/16" Nylon Locknut (3) with a 5/16" Flat
Washer (8) onto the Eyebolt.
29. Rest the Seat Frame (36) on the indicated pin
in the Front Upright (42). Attach the Seat
Frame to the Front Upright with a 5/16" x
2 3/4" Carriage Bolt (14) and the Seat Knob
(40).
26
43 10
27
13
36
81
28
33—Lubricate
35
32
29
14
Pin
13
42
41
38
37
32
18
2
10
36
3
29
8
3
42
40
36