Table of Contents
Advertisement
Model No. WESY85301
Serial No.
Write the serial number in the space
above for reference.
Serial Number Decal (Under Seat)
QUESTIONS?
As a manufacturer, we are com-
mitted to providing complete
customer satisfaction. If you have
questions, or find that there are
missing or damaged parts, we
will guarantee you complete sat-
isfaction through direct assis-
tance from our factory.
TO AVOID UNNECESSARY
DELAYS, PLEASE CALL DIRECT
TO OUR TOLL-FREE CUSTOMER
HOT LINE. The trained techni-
cians on our customer hot line
will provide immediate assis-
tance, free of charge to you.
CUSTOMER HOT LINE:
1-800-999-3756
Mon.ÐFri., 6 a.m.Ð6 p.m. MST
PATENT PENDING
CAUTION
Read all precautions and instruc-
tions in this manual before using
this equipment. Save this manual
for future reference.
USERÕS MANUAL
Visit our website at
www.weiderfitness.com
new products, prizes,
fitness tips, and much more!
Advertisement
Table of Contents
Related Manuals for Weider 8530 WESY85301
Summary of Contents for Weider 8530 WESY85301
- Page 1 Model No. WESY85301 USERÕS MANUAL Serial No. Write the serial number in the space above for reference. Serial Number Decal (Under Seat) QUESTIONS? As a manufacturer, we are com- mitted to providing complete customer satisfaction. If you have questions, or find that there are missing or damaged parts, we will guarantee you complete sat- isfaction through direct assis-...
-
Page 2: Table Of Contents
TABLE OF CONTENTS IMPORTANT PRECAUTIONS .............2 BEFORE YOU BEGIN . -
Page 3: Before You Begin
BEFORE YOU BEGIN Thank you for selecting the versatile WEIDER 8530 Service Department toll-free at 1-800-999-3756, ¨ Home Gym System. The WEIDER 8530 offers a Monday through Friday, 6 a.m. until 6 p.m. Mountain ¨ selection of weight stations designed to develop every Time (excluding holidays). -
Page 4: Assembly
¥ Place all parts of the WEIDER 8530 in a cleared ¥ Tighten all parts as you assemble them, unless area and remove the packing materials; do not instructed to do otherwise. - Page 5 2. Insert two 5/16Ó x 2 1/2Ó Carriage Bolts (1) up through the Base (4). Slide the Front Upright (42) onto the 5/16Ó x 2 1/2Ó Carriage Bolts (1) in the Base (4). Hand-tighten a 5/16Ó Nylon Locknut (3) onto each Carriage Bolt.
- Page 6 5. Press a Weight Tube Bumper (64) into the end of a Weight Tube (63). Insert the Weight Holes Tube into the front stack of Weights (25). Be sure that the pins on the Weight Tube are sitting in the pin grooves in the top Weight.
- Page 7 7. Attach the upper ends of the Long Weight Guides (62) to the Top Frame (55) with a 5/16Ó x 6Ó Bolt (60), two 1/2Ó x 3/4Ó Spacers (61), and a 5/16Ó Nylon Locknut (3). Be sure that the Pulley Bracket (20) is in front of the right Long Weight Guide (62) as shown.
- Page 8 11. Lubricate both axles on the Top Frame (55). Bracket Slide the Right Arm (48) onto the right axle. Be careful not to confuse the Right Arm with the Left Arm (47); note the position of the ÒVÓ Pulley (50) to identify the Right Arm.
- Page 9 During steps 13 to 25, refer to the CABLE DIA- GRAM on page 19 of this manual. Identify the three cables by their lengths, and note the positions of the cable traps. IMPORTANT: Do not overtighten the bolts and nuts securing the pulleys.
- Page 10 17. Route the Medium Cable (58) around the 3 1/2Ó Pulley (15) attached to the bracket on the Top Frame (55). Tighten the 3/8Ó x 2Ó Bolt Bracket (12) and the 3/8Ó Nylon Locknut (21). (Note: This Pulley is pre-assembled. It has been shown disassembled for easy part identifica- tion.) Be sure that the Cable is in the groove of the Pulley and that the Cable...
- Page 13 25. See inset drawing A. Note: The inset draw- Insets show view ing shows the view from the other side of from other side the Squat Arm Upright (56). Wrap the Long Cable (72) around a ÒVÓ-Pulley (50). Attach the ÒVÓ-Pulley and a Long Cable Trap (31) to the top hole in the Squat Arm Upright with the 3/8Ó...
- Page 14 28. Press a 1 1/2Ó Inner Cap (32) into the Leg Lever (29). Lubricate the 5/16Ó x 2 1/4Ó Bolt (33). Attach the Leg Lever (29) to the Seat Frame (36) with the 5/16Ó x 2 1/4Ó Bolt and a 5/16Ó Nylon Locknut (3).
-
Page 15: Decals
32. Wet the handle on the Right VKR Arm (80) with soapy water. Slide a 5Ó Plastic Grip (83) onto the Handle. Press a 1Ó Round Inner Cap (49) into the bottom of the handle. Attach a 5Ó Plastic Grip (83) and a 1Ó Round Inner Cap (49) to the handle on the Left VKR Arm (79) in the same manner. -
Page 16: How To Use The Home Gym System
CHANGING THE WEIGHT SETTING The WEIDER 8530 features two weight stacks. The front weight stack is connected to the upper and lower pulleys, the press arm, and the butterfly arms. -
Page 17: Attaching/Removing Seat
ATTACHING AND REMOVING THE SEAT To attach the Seat (13), set the bracket on the Seat Frame (36) onto the indicated pins on the Front Upright (42). Attach the Seat Frame to the Front Upright with the 5/16Ó x 2 3/4Ó Carriage Bolt (14) and the Seat Knob (40). -
Page 18: Trouble-Shooting And Maintenance
TROUBLE-SHOOTING AND MAINTENANCE Inspect and tighten all parts each time you use the home gym system. Replace any worn parts immediately. The home gym system can be cleaned using a damp cloth and mild non-abrasive detergent. Do not use solvents. TIGHTENING THE CABLES Woven cable, the type of cable used on the home gym system, can stretch slightly when it is first used. -
Page 19: Cable Diagram
CABLE DIAGRAM The cable diagram below shows the proper routing of the Long Cable (72), the Medium Cable (58), and the Short Cable (23). Use the diagram to be sure that the three cables and cable traps have been assembled cor- rectly. - Page 20 PART LISTÑModel No. WESY85301 R0100A Key No. Qty. Description Key No. Qty. Description 5/16Ó x 2 1/2Ó Carriage Bolt ÒVÓ-Pulley 1/4Ó Nylon Locknut 2Ó Outer Cap 5/16Ó Nylon Locknut Chain Base Cable Clip Stabilizer Lat Bar 1Ó Inner Cap Top Frame 5/8Ó...
- Page 21 EXPLODED DRAWINGÑModel No. WESY85301 R0100A...
- Page 22 1/4" x 3/4" Screw (18)Ð2 3/8" x 3 1/2" Bolt (16)Ð1 3/8" x 3 3/4" Bolt (88)Ð4 5/16" x 5" Bolt (68)Ð1 Cable Clip (53)Ð2 1" Retainer (69)Ð4 1 1/4" x 2 1/2" Plastic Bushing (89)Ð2 1" x 7/8" Plastic Bushing (90)Ð2 3 1/2"...
- Page 23 5/8" x 5/8" Spacer (76)Ð1 1" Inner Cap (98)Ñ2 5/16" x 2" Eyebolt (35)Ñ1 1/2" x 17/32" Spacer (91)Ð2 5/8" x 9/16" Spacer (7)Ð1 1" Round Inner Cap (49)Ð6 3/4" Round Inner Cap (34)Ð4 1/2" x 3/4" Spacer (61)Ð4 1" Round Cover Cap (70)Ð2 1"...
- Page 24 1/4" Nylon Locknut (2)Ð4 1/4" x 2" Machine Screw (81)Ð5 5/16" Nylon Locknut (3)Ð27 5/16" x 2 1/2" Bolt (22)Ð6 3/8" Nylon Locknut (21)Ð16 3/8" x 2" Bolt (12)Ð6 3/8" Jam Nut (92)Ð2 5/16" x 2 1/4" Bolt (33)Ð1 1/4" Flat Washer (10)Ð13 1/4"...
-
Page 25: Ordering Replacement Parts
Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays). To help us assist you, please be pre- pared to give the following information: 1. The MODEL NUMBER of the product (WESY85301) 2. The NAME of the product (WEIDER 8530 Home Gym System) ¨...