30. Press two 3/4" Round Inner Caps (34) into
each 13 1/2" Pad Tube (28).
Insert the 13 1/2" Pad Tube (28) into the Seat
Frame (36). Slide a 6" Pad (30) onto each
end of the Pad Tube.
Insert the other 13 1/2" Pad Tube (28) into the
Leg Lever (29). Slide a 6" Pad (30) onto each
end of the Pad Tube.
31. Press 1 1/2" Inner Caps (32) into the ends of
the Left VKR Arm (79) and the Right VKR
Arm (80).
Attach the Left VKR Arm (79) and the Right
VKR Arm (80) to the VKR Upright (74) with
two 5/16" x 3" Bolts (75) and two 5/16" Nylon
Locknuts (3).
32. Wet the handle on the Right VKR Arm (80)
with soapy water. Slide a 5" Plastic Grip (83)
onto the Handle. Press a 1" Round Inner Cap
(49) into the bottom of the handle.
Attach a 5" Plastic Grip (83) and a 1" Round
Inner Cap (49) to the handle on the Left VKR
Arm (79) in the same manner.
33. Attach a VKR Armrest (78) to the Right VKR
Arm (80) with two 1/4" x 2" Machine Screws
(81) and two 1/4" Flat Washers (10).
Attach a VKR Armrest (78) to the Left VKR
Arm (79) in the same manner.
Attach the VKR Backrest (77) to the VKR
Upright (74) with two 1/4" x 2 1/2" Screws
(43) and two 1/4" Flat Washers (10).
30
36
30
31
75
80
32
32
83
80
49
33
78
80
81
77
14
34
28
34
29
74
79
3
79
83
43
74
10
10
79
78
30