Advertisement
Model No. WESY85070
Serial No.
Write the serial number in the space
above for future reference.
Serial Number Decal (Under Seat)
QUESTIONS?
As a manufacturer, we are
committed to providing complete
customer satisfaction. If you
have questions, or if there are
missing or damaged parts, we
will guarantee complete satisfac-
tion through direct assistance
from our factory.
TO AVOID UNNECESSARY
DELAYS, PLEASE CALL DIRECT
TO OUR TOLL-FREE CUSTOMER
HOT LINE. The trained techni-
cians on our customer hot line
will provide immediate assis-
tance, free of charge to you.
CUSTOMER HOT LINE:
1-800-999-3756
Mon.ÐFri., 6 a.m.Ð6 p.m. MST
CAUTION
Read all precautions and instruc-
tions in this manual before using
this equipment. Save this manual
for future reference.
Patent Pending
USER'S MANUAL
Advertisement
Table of Contents
Related Manuals for Weider WESY85070
Summary of Contents for Weider WESY85070
- Page 1 Model No. WESY85070 Serial No. Write the serial number in the space above for future reference. Serial Number Decal (Under Seat) QUESTIONS? As a manufacturer, we are committed to providing complete customer satisfaction. If you have questions, or if there are...
-
Page 2: Table Of Contents
TABLE OF CONTENTS IMPORTANT PRECAUTIONS ............. .2 BEFORE YOU BEGIN . -
Page 3: Before You Begin
Whether your goal is to tone your body, build dramatic muscle size and strength, or improve your cardiovascular system, the WEIDER 8507 will help you to achieve the specific results you want. For your safety and benefit, read this manual care- fully before using the WEIDER System. -
Page 4: Assembly
ASSEMBLY Assembly requires two people. Due to the size and weight of the home gym system, assemble it in the location where it will be used. ¥ Place all parts of the home gym system in a cleared area and remove the packing materials; do not dispose of the packing materials until assembly is completed. - Page 5 3. Slide six Weights (25) on the Weight Guides (72). Be sure that all of the Weights are turned so the pin grooves are on the indicated side. 4. Press the 1 1/4Ó Square Inner Cap (57) into the Front Upright (42). Attach the 1Ó...
- Page 6 5. Press the Weight Tube Bumper (79) into the end of the Weight Tube (80). Slide the Top Weight (77) onto the Weight Tube. Be sure that the pins on the Weight Tube are resting in the pin grooves under the Top Weight.
- Page 7 8. Attach the upper ends of the Weight Guides (72) to the Top Frame (67) with the 5/16Ó x 6Ó Bolt (74), two 1/2Ó x 3/4Ó Spacers (73), and a 5/16Ó Nylon Locknut (3). Tighten all Nylon Locknuts used in steps 4 through 8.
- Page 8 11. Press a 1 3/4Ó Square Inner Cap (44) into each end of an Arm (46). Apply lubricant to the lower axles on the Arm Frame (52). Slide an Arm (46) onto one of the axles. Hold two 1Ó Retainers (54) and a 1Ó Round Cover Cap (55) against the lower end of the axle.
- Page 9 14. Attach a Large ÒUÓ Bracket (56) to one of the Arms (46) with a 3/8Ó x 2 3/4Ó Bolt (70), 3/8Ó Flat Washer (9), and 3/8Ó Nylon Locknut (21). Be sure that the Swivel Bracket (58) is on the inside as shown. Do not overtighten the 3/8Ó...
- Page 10 16. Remove the 3/8Ó x 1 3/4Ó Bolt (48), 3/8Ó Nylon Jam Nut (5), and 3 1/2Ó Pulley (15) from the indicated bracket on the Top Frame (67). Insert the end of the Long Cable (66) through the bracket and down through the indicated hole.
- Page 11 19. Note: The 4 1/2Ó Pulley (81) shown in this step is pre-attached to the Adjustment ÒUÓ Bracket (75). Remove the 3/8Ó x 1 3/4Ó Bolt (48), 3/8Ó Nylon Locknut (21), and 4 1/2Ó Pulley (81) from the Adjustment ÒUÓ Bracket (75). Attach the Adjustment ÒUÓ...
- Page 12 21. Attach the 5/16Ó x 3Ó Bolt (17), two 5/16Ó Flat Washers (8), and a 5/16Ó Jam Nut (2) to the indicat- ed hole in the Top Frame (67). Slide the end of the Long Cable (66) onto the 5/16Ó x 3Ó...
- Page 13 23. Attach the 5/16Ó x 3 1/2Ó Bolt (87), two 5/16Ó Flat Washers (8), the 1Ó Metal Spacer (22), and a 5/16Ó Nylon Locknut (3) to the Front Upright as shown. Wrap the Short Cable (23) around a 3 1/2Ó Pulley (15).
- Page 14 26. Press a 1 1/2Ó Square Inner Cap (32) into the Leg Lever (29). Attach the 5/16Ó x 2Ó Eyebolt (62) to the Leg Lever (29) with a 5/16Ó Flat Washer (8) and a 5/16Ó Nylon Locknut (3). Lubricate a 5/16Ó x 2 1/4Ó Bolt (33). Attach the Leg Lever (29) to the Seat Frame (36) with the Bolt and a 5/16Ó...
- Page 15 29. Slide a Handgrip (12) onto each end of the Lat Bar (85). 30. Make sure that all parts are properly tightened. The use of all remaining parts will be explained in ADJUST- MENT, beginning on page 16 of this manual. Before using the home gym system, pull each cable a few times to make sure that the cable moves smoothly over the pulleys.
-
Page 16: Adjustment
ADJUSTMENT The instructions below describe how each part of the home gym system can be adjusted. Refer to the EXERCISE GUIDE accompanying this manual to see how the home gym system should be set up for each exercise. IMPORTANT: When attaching the lat bar or nylon strap, make sure that the attachments are in the correct starting position for the exercise to be performed. - Page 17 ATTACHING AND REMOVING THE SEAT Set the bracket on the Seat Frame (36) on the indicated pin on the Front Upright (42). Attach the Seat Frame to the Front Upright with the 5/16Ó x 2 3/4Ó Carriage Bolt (14) and Seat Knob (40). For some exercises, the Seat (13) must be removed.
- Page 18 ATTACHING THE LAT BAR OR NYLON STRAP TO THE LOW PULLEY STATION Attach the Lat Bar (85) to the Short Cable (23) with a Cable Clip (83). For some exercises, the Chain (84) should be attached between the Lat Bar and the Short Cable with two Cable Clips.
-
Page 19: Trouble-Shooting And Maintenance
TROUBLE-SHOOTING AND MAINTENANCE Inspect and tighten all parts each time you use the home gym system. Replace any worn parts immediately. The home gym system can be cleaned using a damp cloth and mild non-abrasive detergent. Do not use solvents. TIGHTENING THE CABLES Woven cable, the type of cable used on the home gym system, can stretch slightly when it is first used. -
Page 20: Part List
PART LISTÑModel No. WESY85070 Key No. Qty. Description 5/16Ó x 2 1/2Ó Carriage Bolt 5/16Ó Nylon Jam Nut 5/16Ó Nylon Locknut Base 3/8Ó Nylon Jam Nut Support Plate 1/4Ó Nylon Locknut 5/16Ó Flat Washer 3/8Ó Flat Washer 1/4Ó Flat Washer 5/16Ó... -
Page 21: Exploded Drawing
EXPLODED DRAWINGÑModel No. WESY85070 27 67 68 81 R0498A... -
Page 22: Cable Diagrams
CABLE DIAGRAMS The cable diagrams below show the proper routing of the Short Cable (23) and the Long Cable (66). Use the diagram to make sure that the two cables are assembled correctly. The numbers show the routing of each cable. Long Cable (66) Short Cable (23) Top Frame... - Page 23 3/4" Round Inner Cap (34) 1" Round Inner Cap (49) 1" Round Cover Cap (55) 5/16" x 2" Eyebolt (62) 1 1/4" Square Inner Cap (57) 1 1/2" Square Inner Cap (32) 1 3/4" Square Inner Cap (44) 2" Square Inner Cap (27) 2"...
- Page 24 1/4" Nylon Locknut (7) 1/4" x 1/2" Screw (31) 1/4" x 3/4" Screw (18) 1/4" Nylon Jam Nut (86) 1/4" x 2" Screw (20) 5/16" Jam Nut (2) 1/4" x 2 1/2" Screw (43) 5/16" Nylon Locknut (3) 5/16" x 1 1/2" Bolt (24) 3/8"...
- Page 25 5/16" x 2 1/2" Carriage Bolt (1) 1/2" x 3/8" Spacer (51) 5/16" x 2 3/4" Carriage Bolt (14) 1/2" x 1/2" Spacer (65) 5/16" x 2 3/4" Bolt (11) 1/2" x 3/4" Spacer (73) 3/8" x 2 3/4" Bolt (70) 1"...
-
Page 26: Ordering Replacement Parts
4. The KEY NUMBER and DESCRIPTION of the part(s) (see the PART LIST on page 20 of this manual). WEIDER is a registered trademark of ICON Health & Fitness, Inc. ICON Health & Fitness, Inc. (ICON), warrants this product to be free from defects in workmanship and material, under normal use and service conditions, for a period of ninety (90) days from the date of pur- chase.