Table of Contents
Advertisement
Quick Links
®
USERʼS MANUAL
Model No. WESY85103
Serial No.
(Write the serial number in the space
above for reference.)
Serial Number Decal
QUESTIONS?
As a manufacturer, we are com-
mitted to providing complete
customer satisfaction. If you have
questions, or find there are miss-
ing or damaged parts, we will
guarantee you complete satisfac-
tion through direct assistance
from our factory.
TO AVOID UNNECESSARY
DELAYS, PLEASE CALL DIRECT
TO OUR TOLL-FREE CUSTOMER
HOT LINE. The trained techni-
cians on our customer hot line
will provide immediate assis-
tance, free of charge to you.
1-800-999-3756
CUSTOMER HOT LINE:
Mon.–Fri., 6 a.m.–6 p.m. MST
CAUTION
Visit our website at
Read all precautions and instruc-
www.weiderfitness.com
tions in this manual before using
this equipment. Save this manual
new products, prizes,
for future reference.
fitness tips, and much more!
Advertisement
Table of Contents
Related Manuals for Weider WESY85103
Summary of Contents for Weider WESY85103
- Page 1 ® USERʼS MANUAL Model No. WESY85103 Serial No. (Write the serial number in the space above for reference.) Serial Number Decal QUESTIONS? As a manufacturer, we are com- mitted to providing complete customer satisfaction. If you have questions, or find there are miss-...
-
Page 2: Table Of Contents
TABLE OF CONTENTS IMPORTANT PRECAUTIONS ..............3 BEFORE YOU BEGIN . -
Page 3: Important Precautions
IMPORTANT PRECAUTIONS WARNING: To reduce the risk of serious injury, read the following important precau- tions before using the home gym system. 1. It is the responsibility of the owner to ensure 8. Keep hands and feet away from moving parts. that all users of the home gym system are adequately informed of all precautions. -
Page 4: Before You Begin
The model number is strength, or improve your cardiovascular system, the WESY85103. The serial number can be found on a WEIDER 8510 will help you to achieve the specific... -
Page 5: Assembly
ASSEMBLY Before beginning assembly, carefully read the • As you assemble the home gym system, be sure following information and instructions: that all parts are oriented as shown in the drawings. • Place all parts of the home gym system in a cleared area and remove the packing materials;... - Page 6 2. Slide the Front Upright (42) onto the M8 x 63mm Carriage Bolts (1) in the Base (4). Hand tighten an M8 Nylon Locknut (3) onto each Carriage Bolt. Do not tighten the Nylon Locknuts yet. Press a 1” Square Inner Cap (65) into the Front Upright (42).
- Page 7 5. Press the Weight Tube Bumper (64) into the end of the Weight Tube (63). Insert the Holes Weight Tube into the stack of Weights (25). Be sure that the pins on the Weight Tube are aligned with the pin grooves in the upper Weight.
- Page 8 8. Press a 1 3/4” Square Inner Cap (44) into the top of a Press Arm (46). Press a 1” Round Inner Cap (49) into each end of the handle on the Press Arm. Attach the Press Arm to one side of the Press Frame (17) with two M8 x 62mm Bolts (22) and two M8 Nylon Locknuts (3).
- Page 9 11. During steps 11 through 25, refer to the CABLE DIAGRAM on page 20 of this manual to verify proper cable routing. Before begin- ning this section, identify the Long Cable (23) and the Short Cable (58) by comparing the lengths and ends of the cables.
- Page 10 15. Route the Long Cable (23) around the “V”- Pulley (6) on the Right Arm (48). Be sure that the Cable is in the groove of the “V”- Pulley and that the Long Cable Trap (50) is turned to hold the Cable in place. Tighten the M10 x 60mm Bolt (7) and the M10 Nylon Locknut (not shown).
- Page 11 19. Loosen the M10 Nylon Locknut (21) on the lower 3 1/2” Pulley (15) on the Press Frame (17). Locate the Short Cable (58). Route the Short Cable (58) under the 3 1/2” Pulley (15). Be sure that the end of the Cable with the ball is on the indicated side of the Press Frame (17) and that the Cable is between the Pulley and the crossbar on the Press...
- Page 12 21. Route the Short Cable (58) around the 3 1/2” Pulley (15) attached to the upper hole in the Press Frame (17). Be sure that the Cable Trap (66) is turned to hold the Cable in place and that the Cable is routed around the Pulley as shown.
- Page 13 23. Attach the end of the Short Cable (58) to the Long “U”-Bracket (57) with an M8 Nylon Lock- nut (3) and a 5/16” Flat Washer (8). Do not completely tighten the Nylon Locknut. It should be threaded onto the end of the Cable so only a couple of threads are showing above the nut, as shown in the inset drawing.
- Page 14 25. Attach the Backrest (41) to the Front Upright (42) with two M6 x 65mm Screws (43) and two 1/4” Flat Washers (10). 26. Press a 1 1/2” Square Inner Cap (32) into the Seat Frame (36). Insert the M6 x 50mm Carriage Bolt (38) into the center hole in the Seat Plate (37).
- Page 15 28. Rest the Seat Frame (36) on the indicated pin in the Front Upright (42). Attach the Seat Frame to the Front Upright with a M8 x 67mm Carriage Bolt (14) and the Seat Knob (40). 29. Press 3/4” Round Inner Caps (34) into the ends of both 12 1/2”...
- Page 16 30. Remove the decals from the decal sheet (not shown) and apply them to the home gym system in the loca- tions shown below. HIGH PULLEY BUTTERFLY 8510 BENCH PRESS LEG EXTENSION LEG CURL LOW PULLEY 31. Make sure that all parts have been properly tightened. The use of the remaining parts will be explained in ADJUSTMENT, beginning on page 17 of this manual.
-
Page 17: Adjustment
ADJUSTMENT The instructions below describe how each part of the home gym system can be adjusted. Refer to the exercise poster accompanying this manual to see how the home gym system should be set up for each exercise. IMPORTANT: When attaching the lat bar or nylon strap, make sure that the attachments are in the cor- rect starting position for the exercise to be performed. - Page 18 ATTACHING AND REMOVING THE SEAT Set the bracket on the Seat Frame (36) onto the indi- cated pins on the Front Upright (42). Attach the Seat Frame to the Front Upright with the M8 x 67mm Carriage Bolt (14) and the Seat Knob (40). For some exercises, the Seat (13) must be removed.
-
Page 19: Trouble-Shooting And Maintenance
TROUBLE-SHOOTING AND MAINTENANCE Inspect and tighten all parts each time you use the home gym system. Replace any worn parts immediately. The home gym system can be cleaned using a damp cloth and mild non-abrasive detergent. Do not use solvents. TIGHTENING THE CABLES Woven cable, the type of cable used on the home gym system, can stretch slightly when it is first used. -
Page 20: Cable Diagram
CABLE DIAGRAM The cable diagram below shows the proper routing of the Short Cable (58) and the Long Cable (23). Use the diagram to be sure that the two cables and the cable traps have been assembled correctly. If the cables have not been correctly routed, the home gym system will not function properly and damage may occur. - Page 21 NOTES...
-
Page 22: Part List
PART LIST—Model No. WESY85103 R0802A Key No. Qty. Description Key No. Qty. Description M8 x 63mm Carriage Bolt Backrest M6 Nylon Locknut Front Upright M8 Nylon Locknut M6 x 65mm Screw Base 1 3/4” Square Inner Cap Stabilizer 10” Pad “V”-Pulley... -
Page 23: Exploded Drawing
EXPLODED DRAWING—Model No. WESY85103 R0802A... - Page 24 3/4" Round Inner Cap (34)–4 1" Round Inner Cap (49)–6 1" Round Cover Cap (70)–2 1/2" x 3/4" Spacer (61)—2 5/8" x 9/16" Spacer (73)–1 1" Square Inner Cap (65)—1 M8 x 50mm Eyebolt (35)—1 1 3/4" Square Inner Cap (44)–6 1 1/2"...
- Page 25 M6 Nylon Locknut (2)–1 M6 x 50mm Screw (24)–1 M8 Nylon Locknut (3)–19 M6 x 65mm Screw (43)–2 M10 Nylon Locknut (21)–12 M8 x 45mm Bolt (72)–1 1/4" Flat Washer (10)–4 M8 x 57mm Bolt (33)–1 5/16" Flat Washer (8)–7 M8 x 62mm Bolt (22)–4 3/8"...
- Page 26 1 1/8" x 2 1/2" Plastic Bushing (74)–2 1" Retainer (69)–4 M10 x 45mm Bolt (78)–2 1" x 7/8" Plastic Bushing (75)–2 M10 x 50mm Bolt (12)–1 Cable Clip (53)–2 M10 x 60mm Bolt (7)–3 M10 x 80mm Bolt (16)–1 M10 x 90mm Bolt (77)–2 M10 x 95mm Bolt (71)–2...
-
Page 27: Ordering Replacement Parts
Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays). To help us assist you, please be pre- pared to give the following information: 1. The MODEL NUMBER of the product (WESY85103). 2. The NAME of the product (WEIDER 8510 Home Gym System).