Special Functions; Offset Mode; Entering Offset Mode - Chauvet Legand 230SR BEAM User Manual

Color Reset
Gobo Reset
Zoom/Frost/Focus Reset
Reset All

Special Functions

Fixture Maintenance Timers
Fixture Defaulting

Offset Mode

Entering Offset Mode

Legend™ 230SR Beam User Manual Rev. 1
1. Highlight Color and press <ENTER>.
a. Select YES to reset the color wheel and the CMY filters to their home
positions.
b. Accept the selected option.
1. Highlight Gobo and press <ENTER>.
a. Select YES to reset the gobo wheel to its home position.
b. Accept the selected option.
1. Highlight Zoom/Frost/Focus and press <ENTER>.
a. Select YES to reset the prism and the frost to their home positions.
b. Accept the selected option.
1. Highlight All and press <ENTER>.
a. Select YES to reset all moving optical parts and the moving head to their
home positions.
b. Accept the selected option.
From the Main Menu, highlight Special Functions and press <ENTER>.
1. Highlight Fixture Maintenance and press <ENTER> (the current maintenance
interval and remaining time will show).
2. To change the maintenance interval timer, highlight Interval and press <ENTER>.
a. Select the new interval (in hours).
b. Accept the new value.
3. To reset the remaining time counter, highlight Remain Time and press <ENTER>.
a. Select Reset Time to reset the timer or Exit to exit without resetting it.
b. Accept the selected option.
It is a good idea to use the Fixture Maintenance Time as a reminder to change the
lamp.
1. Highlight Factory Setting and press <ENTER>.
a. Select YES to default the product to factory settings, or NO to exit without
resetting.
b. Accept the selected option and wait for the product to reset.
c. Return to the previous menu.
The Offset Mode provides fine adjustments for the home position of all the moving parts
in the optical path as well as the pan and tilt movements. This way, when in their home
position, the moving parts do not show any border or reduce the light output.
1. Press <MENU> to enter the regular Menu Mode.
2. Press <ENTER> for more than three seconds to enter the Offset Mode (the Offset
Mode menu will show).
1. Select Pan and press <ENTER>.
Pan
a. Select the new value (-128~127).
b. Accept the new value.
1. Select Tilt and press <ENTER>.
Tilt
a. Select the new value (-128~127).
b. Accept the new value.
Operation
15