Lamp Replacement; Procedure - Chauvet Legand 230SR BEAM User Manual

Setup

Lamp Replacement

Procedure

8
The Legend™ 230SR Beam is equipped with a Osram Sirius 230W lamp. Follow the
procedure below to safely change the lamp.
Disconnect the product from the AC power before opening.
Do not turn product on without a lamp!
1. Turn the product off and disconnect it from the power outlet. Wait at least 15 minutes
for the lamp to cool down.
2. Remove both head covers by removing 8 Phillips head ¼-turn screws.
3. Orientate the bottom of the moving head so that the fan is up.
Legend™ 230SR Beam User Manual Rev. 1